General Info

For metallographic labs with rigorous sample processing demands, the SimpliMet 4000 provides enhanced throughput and efficiency in a space saving footprint with fast cycle heat times, a Smart Cool system for optimized cool time, and duplex mounting to double throughput.

The Fastest Mounting Press Designed for 24/7 Use. Eliminate bottlenecks at the mounting stage, rapidly transforming your cut samples to specimens ready for grinding and polishing.

The SimpliMet 4000 mounting press, was tested in extreme conditions, and simulated the duty cycle of the busiest labs in the world, providing high reliability in continuous use environments.

The automatic SimpliMet 4000 mounting press packs fast mounting cycles into limited bench space, optimizing productivity. By replacing older, slower, larger mounting presses; capacity can be doubled for the same amount of space.

Use your mounting press out of the box without the wait. New employees can be trained quickly and efficiently.

Benefits:


High reliability in 24/7 use environments

  • The SimpliMet 4000, was tested in extreme conditions, and simulated the duty cycle of the busiestlabs in the world, providing high reliability in continuous use environments.

Optimize Productivity in Your Space

  • The SimpliMet 4000 packs fast mounting cycles into limited bench space, optimizing productivity. By replacing older, slower, larger presses; capacity can be doubled for the same amount of space.
  • Fast duplex mounting allows two mounts to be made during the same cycle with negligible increase in cycle time.

Ease of use saves time and protects sample quality

  • Simple user interface eliminates errors and protects the quality of your sample prep. Everything you need is right on the front panel.
  • Use your press out of the box without the wait. New employees can be trained quickly and efficiently.

Comfortable to use

  • The single handed closure mechanism engages quickly, moving you right into your next task.

Specifications:


SimpliMet 4000 Mounting Press Specifications
OperationAutomatic Electrohydrolics
Mounting Mold SizesEnglish: 1″, 1.25″, 1.5″
Metric: 25mm, 30mm, 40mm, 50mm
Mounting Parameters
Pressure1000 – 4400psi(70 – 300bars) operational pressure range +/- 10%

Adjustable in 50psi (5bar) increments

Preload pressure function applies gradual presssure for delicate specimens 350psi (24bar)

Heat TimeUser Selectable time from 1-20 minutes
Heating Tempurature120° F – 420° F (50° C – 220° C) operation tempurature range
Heating Power1500 Watt@115VAC / 1900 Watt@230VAC
Cooling TimeUser Selectable or Smart Cool

User Selectable time from 1-30 minutes

Adjustable in 10 second increments

Smart Cool Intelligent cooling system automatically cools until sample temperature reaches 40°C

Thermoplasmic FunctionAutomatically sets correct parameters fro thermoplastic resins such as TransOptic TM and cools the mount in a contolled, linear fashion appropriate for the mounting media
Noise Level Max62 dB maximum at 1 meter from the front of the machine, while raising and lowering the ram with the mold closure open
Working EnvironmentTempurature: 40° F to 104° F / 5° C to 40° C

Humidity: 30 – 90% humidity, non-condensing

Electrical
Voltage/Frequency85-264VAC, 50/60Hz 1 phase
Water inlet1/4″ OD tubing or 3/8″ OD tubing
Water OutletDrain: 1/4″ ID x 1/3″ OD hose
Vent: 1/4″ ID x 1/2″ OD hose
Length26.00″ 660mm
Length from rear of machine to front feet21.25″ 540mm
Width12.25″ 311mm
Height Closed19.62″ 498mm
Height Open20.62″ 524mm
Weight120lbs 54kg
ComplianceCE, PSE, RoHS, WEEE

Contact us to request a quotation today!

Print friendly link

Product Photos