Load Cells – Low Profile Annular/Donut Compression

General Info

The CCG series of low profile annular compression load cells have been designed for applications where bolt tension needs to be measured with a low-profile transducer.  They are also used in cable tension applications where they are mounted at the anchor point.

The design can be modified to be even lower in profile if required with heights down to 5mm possible in some cases.
• Capacities: 0-12.5kN up to 0-540kN
• Output: 1.5mV/V nominal
• Environmental Protection: IP66
• Accuracy: <±1.5%/RC
• Custom-Sized Versions Available

© Hylec Controls Pty Ltd since 1979. | All rights reserved. | T: +61 2 9645 4777 | 8 Melissa Street, Auburn NSW 2144, Australia