General Info

The Leeb Hardness Tester T-D2 correspond to to ASTM A956 is the most popular metal hardness testing method in the world, because of very easy to use and does not require special skills from the operator. The probe is mounted on the sample, and by pressing the release button, measurement is performed, and the hardness value is displayed on the device’s screen. The method works well with low alloy steels, stainless steels, as well as non-ferrous metals.

It is usually used for bulk products, without thorough surface preparation and is less sensitive to inhomogeneous or coarse-grained materials.

The main advantages of the Leeb Hardness Tester T-D2:

  • HARDNESS TESTER IS CALIBRATED FOR DIFFERENT MATERIALS AND SCALES

    The Leeb Hardness Tester T-D2 is calibrated to measure the hardness of steels, cast iron, stainless steels, aluminum on all major scales – Rockwell, Brinell and Vickers. And also the hardness tester allows user to evaluate the tensile strength. If necessary, the user can create additional calibration for any scale and material.

  • DYNAMIC METHOD IS NOT MUCH REQUIRED FOR THE SURFACE OF THE PRODUCT AND THE HOMOGENEITY OF THE MATERIALS

    The Leeb method allows user to measure the hardness of products with a poorly prepared surface (roughness up to 3,2 Ra), as well as coarse-grained materials such as cast iron, etc. However, it must be noted that the dynamic method without additional measures allows to test the hardness of only sufficiently massive products (weight over 5 kg, wall thickness at the measurement site more than 10 mm).

  • DEVICE MAY BE USED IN EXTREME CONDITIONS OF OPERATION

    Shock-resistant, rugged housing with a silicone protective bumper cover allows the hardness tester to be made shockproof. The indicator of the device is clearly visible in the sun, when used in the dark – it has a display backlight with adjustable backlight. The hardness tester can be used both in the cold (up to -25 ‎°C), and in conditions of high temperatures. Thus, user can measure hardness in the most severe conditions without worrying that the device can let him down.

Advantages:

  • Wide range of hardness measurement
  • Allows to test the products with coarse, non-uniform structure (castings, forgings)
  • Very ease and simplicity in setup and operation
  • Reasonable price (lower in comparison with the ultrasonic hardness tester)
  • User can save the results of hardness measurements into the internal memory of the device and after that, transfer them to the PC. Device allows user to operate in a wide range of the temperature. Hardness tester T-D2 has a brightness high contrast display. Device also has calibration modes for hardness testing of wide range of metals and alloys.

Specifications:

Range of hardness value
  • Rockwell, HRC: 20 – 70
  • Brinell, HB: 90 – 650
  • Vickers, HV: 230- 940
  • Can be calibrated for any scale and any range.
Measurement accuracy
  • HRC: 2HRC
  • HB: 10HB
  • HV: 15HV
Hardness scale
  • Leeb probe – HRC, HB, HV, HL
  • Additional custom scales for calibration.
Materials
  • Leeb probe – pre-calibrated for steel, alloy steel, stainless steel, aluminum or cast iron.
  • Additional custom scales and materials for calibration.
Standards
  • ASTM A 956
  • ASTM E 140
  • ASTM A 370
  • ISO 16859
  • DIN 50156
  • GB/T 17394
  • JB/T 9378
  • ISO 18265
Storage of measurement results256
Language
  • English
  • Spanish
  • Portuguese
  • French
  • Russian

*additional languages available by request

Dimensions, mm122*65*23
Operating temperature range, ° C-20 to +40
Power supply2pcs AA batteries
Batteries life, not less, h20
Weight of electronic unit with batteries, no more, kg0.2

Contact Hylec Controls for a quotation today!

Print friendly link

Product Photos