Auto Pull-Off Testing satisfying the European and U.S. test standards

LBG’s automatic tensile test machine which can measure the pull-off force of a specified plate glued to building materials such as concrete, tiles and laminates.  This enables the tensile strength of concrete or adhesives to be measured.

The strength readings can vary with the rate of loading.  This machine uses feed-back control to apply the load at a constant ramp rate and uses a load cell to measure the load to within 1%, which satisfies the latest European and U.S. test standards.

This machine is suitable for either lab or on-site testing and requires a 100W power supply if used on-site.  This machine far exceeds the accuracy in load measurement or control of load rate compared to existing manual machines. 

LBG is part of a long established Italian group of companies involved in the field of materials testing.

The auto pull-off tester is available from Hylec Controls.


Warning: assert(): Assertion failed in /home/wphylec/public_html/wp-content/themes/rttheme11/comments.php on line 1

Warning: assert(): Assertion failed in /home/wphylec/public_html/wp-content/themes/rttheme11/comments.php on line 1

Warning: assert(): Assertion failed in /home/wphylec/public_html/wp-content/themes/rttheme11/comments.php on line 1

Warning: assert(): Assertion failed in /home/wphylec/public_html/wp-content/themes/rttheme11/comments.php on line 1

Warning: assert(): Assertion failed in /home/wphylec/public_html/wp-content/themes/rttheme11/comments.php on line 1

Warning: assert(): Assertion failed in /home/wphylec/public_html/wp-content/themes/rttheme11/comments.php on line 1

Warning: assert(): Assertion failed in /home/wphylec/public_html/wp-content/themes/rttheme11/comments.php on line 1
© Hylec Controls Pty Ltd since 1979. | All rights reserved. | T: +61 2 9645 4777 | 8 Melissa Street, Auburn NSW 2144, Australia